ارگونومی، جلد ۵، شماره ۴، صفحات ۰-۰

عنوان فارسی ارزیابی و کنترل ریسک فاکتورهای ارگونومیکی در شرکتهای الکترونیکی (مطالعه موردی)
چکیده فارسی مقاله مقدمه: فرآیند طراحی و ساخت در شرکت­ های الکترونیکی، بیشترین مدت‌زمان کار با رایانه را به خود اختصاص می­دهد. به علت فراوانی بالای اختلالات اسکلتی- عضلانی در کاربران رایانه، لازم است که محققین نسبت به شناسایی ریسک ­فاکتورها و مشکلات ارگونومیکی و راه­ های کاهش آن­ها اقدام کنند. مواد و روش­ ها: این مطالعه؛­ توصیفی- تحلیلی بوده و به­ صورت مداخله ­ای در شرکت مهندسی به پژوه در اصفهان انجام شد. بررسی آماری به صورت سرشماری (31 نفر) انجام گرفت. از پرسشنامه نوردیک و روش ارزیابی سریع تنش اداری (ROSA) برای ارزیابی ریسک فاکتورهای ارگونومی استفاده شد. آنالیز آماری داده ­ها از طریق آزمون نا­پارامتریمک­نمار و ویلکاکسون و استفاده از نرم‌افزار SPSS انجام گرفت. یافته ­ها: نتایج حاصل از پرسشنامه نوردیک؛ قبل از مداخله ارگونومی؛ فراوانی مشکلات در ناحیه آرنج صفر، در ناحیه کمر، فوقانی پشت، گردن و شانه با فراوانی 38- 45 درصد نشان می­دهد. ارزیابی ریسک فاکتورهای ارگونومیکی حاصل از پرسشنامه ارزیابی سریع تنش اداری قبل از مداخله نشان می­دهد که 5/35% (11 نفر) در سطح ریسک کم؛ 7/38% (12 نفر) در ناحیه هشدار و 8/25% (8 نفر) در ناحیه ضرورت انجام مداخله ارگونومی قرار دارد. بررسی­های آماری پس از اجرای مداخلات ارگونومیکی نشان می­دهد که تعداد افراد در ناحیه هشدار و ضرورت کمتر از تعداد افراد قبل از مداخله بوده است. نتیجه­ گیری: بیشترین اختلالات اسکلتی- عضلانی در ناحیه­ گردن، کمر، فوقانی پشت و شانه‌ها گزارش شد. نتایج آماری بعد از مداخلات ارگونومیکی؛ نشان­ دهنده کاهش این اختلالات می­ باشد. نتایج منجر به درک این موضوع شد که خطرات موجود در شرکت­ های الکترونیکی به ویژه بروز ضایعات اسکلتی- عضلانی را می­توان با مداخلات ارگونومی و تکیه بر اقدامات مهندسی، مدیریتی و آموزشی کاهش داد.
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Evaluation & control of ergonomic risk factors in electronics companies- Case study engineering company Behpajooh
چکیده انگلیسی مقاله Introduction: The design and manufacturing process in electronic companies is the most time consuming work with the computer. Because of the high prevalence of musculoskeletal disorders in computer users, researchers need to identify risk factors and ergonomic problems and ways to reduce them. Materials and Methods: This study was a descriptive-analytical study and was conducted as an intervention in Behpajooh engineering company in Isfahan. Statistical sampling was done by global sampling (31 people). The Nordic questionnaire and the Rapid Office Strain Assessment (ROSA) were used to evaluate the risk factors of ergonomics. Data analysis was performed by using McNemar and Wilcoxon's non-parametric tests and using SPSS software. Results: The results of the Nordic questionnaire; before ergonomic intervention, the frequency of problems in the elbow region is zero in the waist, upper back, neck and shoulders with a frequency of 45-38%. Evaluation of Ergonomic Risk Factors derived from the Rapid Office Strain Assessment before intervention showed that 35.5% (11 people) at low risk, 38.7% (12 people) in the warning zone and 25.8% (8 people) in the area requiring ergonomic intervention. Statistical analysis of ergonomic interventions shows that the number of people in the area of ​​warning and necessity is less than the number of people before intervention. Conclusion: The most musculoskeletal disorders were reported in the neck, lower back, upper back and shoulders. Statistical results after ergonomic intervention indicate a decrease in these disorders. The results led to the understanding that the risks in electronic companies could be reduced by ergonomic interventions. Implementation of ergonomic interventions based on engineering, management and educational proceeding can be effective in reducing musculoskeletal disorders.  
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله ناصر صدرا ابرقویی | Naser Sadra Abarghouei
University of Applied Science and Technology, Yazd, Iran
استاد دانشگاه جامع علمی- کاربردی، یزد، ایران

فاطمه هاشم پور | Fatemeh Hashempour
Yazd University of Science and Technology, Yazd, Iran
دانشگاه علم و هنر، یزد، ایران


نشانی اینترنتی http://journal.iehfs.ir/browse.php?a_code=A-10-345-3&slc_lang=fa&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده تخصصی
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات