|
مهندسی بهداشت حرفه ای، جلد ۱۰، شماره ۱، صفحات ۱-۸
|
|
|
عنوان فارسی |
بررسی تجربی الگوی انتشار صدا بر مبنای خصوصیات آکوستیکی در کارگاه های صنعتی معمول همدان |
|
چکیده فارسی مقاله |
مقدمه: آلودگی صدای داخل بناها، ناشی از بازتابش صدا از سطوح داخلی آنها است. هدف از مطالعه، بررسی تجربی الگوی انتشار صدا بر مبنای خصوصیات آکوستیکی در کارگاه های صنعتی است. روش کار: در کارگاه هایی مکعب مستطیل در حجم کمتر از 2000 مترمکعب، بین 2000 الی 3000 و 3000 الی 4000 انجام گردید. اندازه گیری زمان بازآوایی براساس 2008: 2-3382 ISO و الگوی انتشار صدا طبق 11690 ISO و تراز صدا با صدای صورتی اندازه گیری شد. به منظور شبیه سازی پارامتر های صوتی از ردیابی تابش در Odeon استفاده گردید. تحلیل داده ها با Spss انجام شد. یافته ها: میانگین زمان بازآوایی در کارگاه های زیر2000، بین 2000 الی3000 و بین3000 الی4000 مترمکعب به ترتیب75/1 ، 25/2 و 77/2 ثانیه، زمان بازآوایی اندازه گیری شده با پیش بینی شده همبستگی معنی داری داشت )0/95 = (r. میانگین کاهش صدا با فاصله از منبع به ترتیب 4 ،3 و 3 دسی بل، ضریب همبستگی بین تراز کاهش صدا و زمان بازآوایی (0/97- r= )، همبستگی بین تراز صدای اندازه گیری و پیش بینی)0/95 = (r تعیین شد. نتیجه گیری: زمان بازآوایی فرمول سابین و آیرینگ مقادیر بالاتری را نسبت به روش اندازه گیری نشان داد. بین میانگین الگوی کاهش صدا و میانگین زمان بازآوایی رابطه ی معنا داری بود. معیار کاهش صدا می تواند با توجه به سادگی روش اندازه گیری معیار خوبی جهت نشان دادن الگوی انتشار صدا باشد. همچنین جهت ارزیابی الگوی انتشار صدا در کارگاه همراه با زمان بازآوایی به صورت توام بکار برده شود. |
|
کلیدواژههای فارسی مقاله |
زمان بازآوایی ، انتشار صدا ، تراز صدا ، کارگاه های صنعتی |
|
عنوان انگلیسی |
Experimental study of noise emission pattern based on acoustic characteristics in typical industrial manufactorys in Hamadan |
|
چکیده انگلیسی مقاله |
Introduction: Noise pollution inside buildings is caused by sound reflection from internal surfaces. The purpose of the study is to experimentally study the sound emission pattern based on acoustic characteristics in industrial manufactorys. Methods: In manufactorys, rectangular cubes with a volume of less than 2000 cubic meters, between 2000 to 3000 and 3000 to 4000 were made. The reverberation time measurement was based on ISO 2-3382:2008 and the sound emission pattern was measured according to ISO 11690 and the sound level was measured with pink noise. In order to simulate sound parameters, radiation tracking was used in Odeon. Data analysis was done with Spss. results: The average reverberation time in manufactorys under 2000, between 2000-3000 and between 3000-4000 cubic meters was 1.75, 2.25 and 2.77 seconds , the measured reverberation time had a significant correlation with the predicted one (r=0.95). The average sound reduction with the distance from the source is 4, 3 and 3 dB, the correlation coefficient between the sound reduction level and the reverberation time (r=-0.97), the correlation between the measured and predicted sound level(r=0.95) was determined. Conclusion: The reverberation time of the Sabin and Eyring showed higher values than the measurement method. There was a significant relationship between the average noise reduction pattern and the reverbration time. simplicity of the measurement method, the sound reduction criterion can be a good criterion to show the sound emission pattern. It should be used together with the reverberation time to evaluate the sound emission pattern in the manufactorys. |
|
کلیدواژههای انگلیسی مقاله |
Reverberation time, sound emission, sound level, industrial manufactorys |
|
نویسندگان مقاله |
محسن علی آبادی | mohsen aliabadi Hamedan University of Medical Sciences دانشگاه علوم پزشکی همدان
سیده الهه حسینی | Seyedeh Elahe hosseini Hamedan University of Medical Sciences دانشگاه علوم پزشکی همدان
رستم گلمحمدی | rostam golmohammadi Hamedan University of Medical Sciences دانشگاه علوم پزشکی همدان
مسعود شفیعی مطلق | Masoud Shafiee Motlagh Hamedan University of Medical Sciences دانشگاه علوم پزشکی همدان
|
|
نشانی اینترنتی |
http://johe.umsha.ac.ir/browse.php?a_code=A-10-998-1&slc_lang=fa&sid=1 |
فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
کد مقاله (doi) |
|
زبان مقاله منتشر شده |
fa |
موضوعات مقاله منتشر شده |
عوامل فیزیکی |
نوع مقاله منتشر شده |
مقاله پژوهشی |
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|