پزشکی بالینی ابن سینا، جلد ۳۰، شماره ۲، صفحات ۱۰۶-۱۱۳

عنوان فارسی بررسی تأثیر تریپسین ۱۰درصد و بروملین ۲۵درصد در میزان استحکام باند ریزبرشی سیستم‌های چسبنده‌ی Etch & Rinse
چکیده فارسی مقاله سابقه و هدف: حذف کلاژن با روش‌های شیمیایی می‌تواند باعث افزایش استحکام باند ریزبرشی ترمیم‌های کامپوزیتی شود. این مطالعه با هدف تاثیر بروملین 25درصد و تریپسین 10 درصد بر استحکام باند ریزبرشی ادهزیوهای Etch & Rinse انجام شد. مواد و روش‌‌ها: پس از تراش سطح جونده و اکسپوز عاج به قطر mm5، نمونه‌ها به‌طور تصادفی به سه گروه مساوی تقسیم شدند (45n=). درگروه کنترل بعد از اچ، سطح ادهزیو Single Bond به کار رفت. در گروه دیگر بعد از اچ، سطح با آنزیم بروملین آماده‌سازی شد. در گروه آخر از آنزیم تریپسین قبل از کاربرد ادهزیو برای آماده‌سازی سطح استفاده شد. سپس سیلندرهایی از کامپوزیت ES Flow روی سطح باند قرار گرفت. در ادامه، استحکام ریزبرشی نمونه‌ها برحسب مگاپاسکال محاسبه شد. یافته‌ها: اختلاف معنی‌داری بین میانگین گروه تریپسین و کنترل (001/0P=) و همچنین گروه بروملین و کنترل (001/0P<) وجود داشت. نتیجه‌گیری: آماده‌سازی عاج اچ‌شده توسط محلول‌های آنزیمی تریپسین و بروملین موجب افزایش استحکام باند ریزبرشی بین مواد کامپوزیتی و عاج دندان در سیستم‌های چسبنده‌ی Etch & Rinse می‌شود.
کلیدواژه‌های فارسی مقاله استحکام باند ریزبرشی، بروملین، تریپسین، سیستم باندینگ عاجی

عنوان انگلیسی Assessment of the Effect of 10% Trypsin and 25% Bromelain on the Micro-Shear Bond Strength of Etch-and-Rinse Adhesive Systems
چکیده انگلیسی مقاله Background and Objective: The removal of collagen by chemical methods can increase the micro-shear band strength of composite restorations. The present study aimed to investigate the effect of bromelain 25% and trypsin 10% on the micro-shear bond strength of Etch-and-rinse adhesives. Materials and Methods: After cutting the chewing surface and exposing the dentin to a diameter of 5mm, the samples were randomly assigned to three equal groups (n=45): in the control group, after etching the adhesive surface, a Single Bond was used. In the other group, after etching, the surface was prepared with bromelain enzyme. In the last group, the trypsin enzyme was used to prepare the surface before applying the adhesive. Thereafter, the cylinders of ES Flow composite were placed on the bond surface. Following that, the micro-shear strength of the samples was calculated in megapascals. Results: There was a significant difference between the mean of the trypsin group and that of the control group (P=0.001), as well as the bromelain group and the control group (P< 0.001). Conclusion: The preparation of etched dentin by trypsin and bromelain enzyme solutions increased the micro-shear bond strength between composite materials and dental dentin in Etch-and-rinse adhesives.  
کلیدواژه‌های انگلیسی مقاله Bromelain, Dentin Bonding System, Micro-Shear Bond Strength, Trypsin

نویسندگان مقاله ابراهیم یارمحمدی | Ebrahim Yarmohammadi
Department of Restorative Dentistry, School of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
بخش دندان‌پزشکی ترمیمی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی همدان، همدان، ایران

شاهین کسرایی | Shahin Kasraei
Department of Restorative Dentistry, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran, Iran
بخش دندان‌پزشکی ترمیمی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی شهید بهشتی، تهران، ایران

محمد حسن دانش | Mohammad Hasan Danesh
Dentist
دندان‌پزشک

فاطمه زارعی | Fatemeh Zarei
Department of Restorative Dentistry, School of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
بخش دندان‌پزشکی ترمیمی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی همدان، همدان، ایران


نشانی اینترنتی http://sjh.umsha.ac.ir/browse.php?a_code=A-12-2330-3&slc_lang=fa&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده دندانپزشکی- ترمیمی
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات